To view this video, OBSERVATION CODES, click on the link
This video is a short introduction to recording observation codes on EICRs correctly.
What code to use is very much up to the individual inspector who is on-the-spot, so to speak. And many inspectors will need little assistance to coding correctly. But what if you are just beginning your journey into the world of inspection and test – this video will help.
Recently we’ve had a few requests to make a simple introduction into choosing the correct observation codes along with questions like …
Is there an easy way to distinguish between a C1 and a C2? And when should a C3 be used.
So this video will keep things simple. There will be a couple of tips on how I look at the different codes and these will help you to understand the logic behind the codes.
One question that often pops up goes like this …
If the installation was installed to a previous edition of the Wiring Regulations, and possibly showing evidence of additions made to earlier editions, which version of the Wiring Regulations should we use?
This video will explain this and lots more.