Skip to content
Menu
Learn Electrics
  • ABOUT US
  • PRIVACY POLICY
Learn Electrics

VIDEO 060 – 18th EDITION – SESSION 4 – ADIABATIC EQUATIONS

Posted on October 17, 2021

To view this video, 18th EDITION – SESSION 4 – ADIABATIC EQUATIONS, click on the link below

https://www.youtube.com/watch?v=173C7yE-xbU

To view all our videos, click on the following link

https://www.youtube.com/channel/UCYaJQnpO4XAp0yCgqzMkmfA

Adiabatic Equations are an essential part of confirming safety in an electrical installation.

During an earth fault there will be massive fault currents flowing, several hundred amps and if the earth cable or CPC has not been correctly specified there is the danger of over-heating and damage to the cable.

This video explains the danger and covers the three types of adiabatic checks that we can make to ensure the safety of the installation and its occupants.

We cover the calculations in an in-depth, step by step, way so that learning can become internalised and properly understood.

There will always be questions on adiabatics in the 18th Edition exam and we cover the types of questions that are most often asked. For everybody else, this will act as a good refresher for forgotten knowledge.

This video is the fourth part of our help series on the 18th Edition of the Wiring Regulations and No.60 on our YouTube channel where we have videos on a wide range of electrical topics.

To see a full list of all our LearnElectrics videos, click on the link below. https://www.youtube.com/channel/UCYaJQnpO4XAp0yCgqzMkmfA

To view this video, 18th EDITION – SESSION 4 – ADIABATIC EQUATIONS, click on the link below

https://www.youtube.com/watch?v=173C7yE-xbU

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • VIDEO 183 – 110 VOLT YELLOW TRANSFORMERS – PLUGS AND SOCKETS – HOW TO WIRE THEM – HOW THEY WORK
  • VIDEO 182 – SUPPLEMENTARY AND MAIN BONDING DIFFERENCES – HOW DO THEY WORK & KEEP US SAFE?
  • VIDEO 181 – ELECTRICAL SAFE ZONES – PRESCRIBED ZONES – WHY HAVE THEM – HOW TO WORK OUT WHERE THEY ARE AND BE SAFE
  • VIDEO 180 – INSPECTION AND TEST PRACTICAL ASSESSMENT – WHAT TO EXPECT IN AN I&T ASSESSMENT – HOW TO BE SUCCESSFUL
  • VIDEO 179 – SOCKET TESTING WITH A 3 WAY TEST LEAD

Recent Comments

    Archives

    • February 2023
    • January 2023
    • December 2022
    • November 2022
    • October 2022
    • September 2022
    • August 2022
    • July 2022
    • June 2022
    • May 2022
    • April 2022
    • March 2022
    • February 2022
    • January 2022
    • December 2021
    • November 2021
    • October 2021
    • September 2021
    • June 2021
    • March 2021
    • February 2021
    • January 2021

    Categories

    • Uncategorized
    ©2023 Learn Electrics | WordPress Theme: EcoCoded