Skip to content
Menu
Learn Electrics
  • ABOUT US
  • PRIVACY POLICY
Learn Electrics

VIDEO 051 – EARTH LEAKAGE MEASUREMENTS

Posted on October 10, 2021

To view this video, EARTH LEAKAGE MEASUREMENTS, click on the link below

https://www.youtube.com/watch?v=VrvT2tdCbm4

To view all our videos, click on the following link

https://www.youtube.com/channel/UCYaJQnpO4XAp0yCgqzMkmfA

It is a requirement of the Wiring Regulations that electricians measure the earth leakage currents in an installation upon completion of their work.

By testing that the earth leakage is within acceptable limits we can have more confidence that the installation will not suffer from unwanted or nuisance tripping.

Many electricians, however, do not fully understand all the requirements and implications of the Wiring Regulations, so this video has been compiled to help everyone have a greater understanding.

An electrician will often be called upon by a customer with an RCD that is tripping every day, every evening and so on. The electrician may carry out certain tests in an attempt to uncover the cause, but may miss certain vital clues because the tests are not carried out fully.

In this video we hope to address those issues and hopefully help you to gain more knowledge in order that you can confidently approach those nuisance tripping problems.

A logical and methodical approach to fault finding for nuisance tripping will often uncover the problem.

To view this video, EARTH LEAKAGE MEASUREMENTS, click on the link below

https://www.youtube.com/watch?v=VrvT2tdCbm4

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • VIDEO 147 – TABLE OF TABLES – 18th EDITION – AMENDMENT 2 – FINDING THE ANSWER
  • VIDEO 146 NEW REGULATIONS – NEW QUESTIONS – 18TH EDITION – AMENDMENT 2 – FINDING THE ANSWER
  • VIDEO 145 – Zs TABLES – 18th EDITION EXAM – AMENDMENT 2 – ANSWERING THE QUESTION
  • VIDEO 144 – 18TH EDITION EXAM QUESTIONS – AMENDMENT 2 – FINDING THE ANSWER
  • VIDEO 143 – RING CIRCUIT CALCULATIONS – TESTING METHODS – SOME PROBLEMS – THE RIGHT NUMBERS AND THE WRONG ONES

Recent Comments

    Archives

    • June 2022
    • May 2022
    • April 2022
    • March 2022
    • February 2022
    • January 2022
    • December 2021
    • November 2021
    • October 2021
    • September 2021
    • June 2021
    • March 2021
    • February 2021
    • January 2021

    Categories

    • Uncategorized
    ©2022 Learn Electrics | WordPress Theme: EcoCoded